| [00:01.52] |
Lesson 13 |
| [00:03.47] |
The search for oil |
| [00:11.78] |
What do oilmen want to achieve as soon as they strike oil? |
| [00:18.47] |
The deepest holes of all are made for oil, and they go down to as much as 25,000 feet. |
| [00:26.54] |
But we do not need to send man down to get the oil out, as we must with other mineral deposits. |
| [00:34.26] |
The holes are only borings, less than a foot in diameter. |
| [00:39.32] |
My particular experience is largely in oil, and the search for oil has done more to improve deep drilling than any other mining activity. |
| [00:49.86] |
When it has been decided where we are going to drill, |
| [00:53.45] |
we put up at the surface an oil derrick. |
| [00:57.67] |
It has to be tall because it is like a giant block and tackle and we have to lower into the ground |
| [01:04.36] |
and haul out of the ground great lengths of drill pipe which are rotated by an engine at the top |
| [01:10.79] |
and are fitted with a cutting bit at the bottom. |
| [01:14.86] |
The geologist needs to know what rocks the drill has reached, |
| [01:19.45] |
so every so often a sample is obtained with a coring bit. |
| [01:24.87] |
It cuts a clean cylinder of rock, from which can be seen the strata the drill has been cutting through. |
| [01:32.45] |
Once we get down to the oil, it usually flows to the surface because great pressure either from gas or water, is pushing it. |
| [01:42.48] |
This pressure must be under control, and we control it by means of the mud which we circulate down the drill pipe. |
| [01:51.53] |
We endeavour to avoid the old, romantic idea of a gusher, which wastes oil and gas. |
| [01:59.14] |
We want it to stay down the hole until we can lead it off in a controlled manner. |
